WLN4100-HB White Labs Ultra Ferm 10mL Kegland

White Labs ULTRA-FERM is a liquid amyloglucosidase (highly concentrated) from selected classical strain of Aspergillus niger. Ultra-Ferm can be used to make Brut IPAs.

APPLICATIONS:

1) To reduce saccharification times.
2) To saccharify unmalted cereal brews.
3) To increase attenuation.

FUNCTION IN BEER PRODUCTION:

Brewers often want to produce light beers or dietetic beers. In these cases the brewer wants a controlled or complete hydrolysis of starch and dextrins to fermentable glucose. Traditional brewing methods permit only 75 to 80% hydrolysis of starch present in the grain raw material. Ultra-Ferm amyloglucosidase permits total hydrolysis of dextrins to fermentable glucose, from all types of starch.

In the brewhouse, the recommended application dosage of Ultra-Ferm is 0.8 to 3.2L per ton of starch. It can be added at the beginning of the mash-in. Ultra-Ferm optimal pH is between 3.5 and 5.5. Temperature should not exceed 60°C. Amyloglucosidase activity is completely destroyed when the wort is held at 85°C for 10 minutes.

FUNCTION IN SPIRITS PRODUCTION: 

After starch liquefaction by alpha-amylase, dextrins are hydrolysed in glucose by amyloglucosidase, before alcoholic fermentation. Ethanol production is faster and yield is higher. The recommended saccharification temperature is 60°C.

A suitable substrate for saccharification is a liquefied starch with a dextrose equivalent (DE) between 10 and 20. A higher DE than 20 might reduce the saccharification efficiency. The concentration of the substrate will also influence the saccharification efficiency. A concentration of 20-25% is a general practice. ULTRA-FERM dosage, for given reaction time, depends on the amount of glucose requested. It is usually recommended to add 400 ml per ton of starch for a fast hydrolysis. Possible pH range of use is from 3.5 to 5.5 with optimal between 4.0 and 5.3.

Optimal temperature is 60°C. Amyloglucosidase activity is completely destroyed when the saccharified liquor is held at 85°C for 10 minutes. As an example: a yield of 94% glucose can be obtained after 40 hours with 36000 AGI per kg dry matter; after 72 hours with 17000 AGI/kg and after 85 hours with 13000 AGI/kg, at pH 4.5 with temperature 60°C.

Size available: 10 mLs / 19 L / 5 US Gal (batch)

DIRECTIONS:

Application: Starch conversion to glucose.  This enzyme is perfect for Brut-style beers, conversion of starch in adjuncts.

Dosage: 25 ml / 10BBL / 11.9hL / 1,190 Litres

Time: Add at beginning of mash-in

• Depending on substrate and dosage rate, an extended mash time of 2-3 hours may be necessary.
• Optimal pH is between 3.5 and 5.5
• Temperature should not exceed 60°C (140°F)
• Amyloglucosidase activity is completely destroyed when the wort is held at 85°C for 10 minutes.

WHITE LABS ULTRA FERM SPEC SHEET